The 2020 Pin Loom Commemorative "Dumpster Fire" Christmas Ornament

2020 has been a pretty challenging year. What with a pandemic and politics and quarantines, unemployment and some super-weird theories about what has been going on (yep, I'm looking at you, Q-Anon) this is not a year that many would ever want to experience again. 

But even a terrible year needs to be remembered, and what better image to commemorate the year 2020 than a dumpster fire? 

Here is my take on a special pin loom Christmas ornament made especially for this strange, terrible year. It is easy to make and, considering that you are only going to weave one-third of the flame squares, pretty quick to finish. 

The Dumpster Fire ornament is made with three 4" squares and one 2" x 4" rectangle. If you do not have a 2" x 4" loom, weave another 4" square and fold it in half.  I used two shades of green for my dumpster, you can choose whatever color you want, perhaps a deep blue, to match the local dumpster color. After weaving, I made a single crochet edge on both of the dumpster squares. 

Weave the flames for the dumpster fire. The easiest way to do this is to wind the yarn for a two layer weave rather than the usual three layer weave. Choose some flame colored yarn. I used variegated red yarn alternating with yellow yarn. You are going to make two layers of flame, I used darker reds for the back layer and more yellow in the top layer. 

Warp the first layer as in the normal pin loom instructions. Then turn the loom 180 degrees. Go around the first pin and warp this layer as in the pin loom instructions for the third layer.  This will give you a solid warp, you will be weaving each line (not every other line as with the normal pin loom weaving pattern) one third the way up the square, then stop and tie off your yarn. 

Once these squares are off the loom clip the yarn to better represent flames. Stack the flame squares on top of the 4" back of dumpster and stitch in place. I added a 1 1/2" x 3 1/2" piece of cardboard on top of the flame squares to stiffen the ornament and stitched the cardboard to the woven portion of the flame squares.  

Before adding the front of the dumpster, use a white or light grey yarn to stitch "2020" to this rectangle.  The stitching should not look too perfect, which worked out really well considering my embroidery skills. Use a whip stitch to stitch the top of the dumpster to the back of the dumpster.  Add an 8" crocheted chain to the back as a hanger for the ornament. 

These Dumpster Fire ornaments were so easy and fun to make that I wove a couple more so that several relatives will get their own special remembrance of this very special year. 

A pin loom Gnome for the holidays!

I'll be Gnome for Christmas... Gnome Sweet Gnome... There's no place like Gnome for the holidays...  

PATTERN DIRECTIONS FOR A PIN LOOM GNOME

This is a pattern that I worked out with the assistance and  encouragement of a fellow Oregon Flock and Fiber participant.
She mentioned that she wanted to make gnomes and we worked out just how fun and easy it would be to weave up Pin Loom Gnomes for the holidays!

This is a fun little pattern that will have pin loom gnomes appearing everywhere this season.

Add them to every sort of holiday decoration, make a few Gnome Wreaths, use them for that last minute stocking stuffer or have them popping out of every corner.

They are so cute and easy to make that its hard to stop.  So I wish you a very Gnomley holiday season!

Pin Loom Christmas II

Here's a couple more Christmas ideas-- scalable snowflake squares to use for coasters, place mats or a winter throw... plus poinsettias!

Idea #3  Make a snowflake square, then make a bunch more snowflake squares, then turn them into very cool presents. 

These are 4" pin loom squares embellished with snowflake patterns in white yarn.  The top square has a single crochet edge, the bottom square was supposed to have a more "icicle" look.

Here are the directions to crochet the bottom square's icicle edge: There should be one icicle point in each of the double loops. In the first loop, chain 3, sc2 back down the chain, then in the second loop, sc1. Repeat all the way around the square. 

Either style makes a great coaster.  Weave four squares, embellish with four snowflake patterns and you've got a pretty nice hostess gift (or add a bottle of wine for a great hostess gift.) Snowflake patterns are easy to make up or find online.

Or scale it up, turn 12 squares with a variety of snowflake patterns into a winter themed place mat. Make a table runner that is just the right size for your table. Keep in mind that the single crochet edge makes a very pretty join, just whip stitch the squares together.

Make a set of place mats or just keep going and make a cozy winter blanket as a gift for yourself  or someone you really care about (I mean, come on, its going to take a lot of squares).  I would suggest only embellishing a few of the squares so that it doesn't get too busy. Consider using a number of different shades of blue for the larger project to add more depth/texture to the design. 

 Idea #4  Make a pin loom poinsettia as a Christmas pin or to embellish a gift, make a whole bunch of pin loom poinsettias and decorate a tree!

This is a pulled thread pin loom flower, also known as a Loom Bloom, originated by Jana Trent of Eloomination.com fame. It is made with two 4" x 4" squares.

Make the bloom by finding a thread right in the middle of the square and pulling on it to cause the square to pucker in. Then pull on the other thread (you're pulling on one horizontal and one vertical thread) to create four petals. Do the same to the second square and stack the two squares to make a multiple petal flower.

Add a bunch of french knots in yellow and light green to create a poinsettia like look. This sample flower has a 4" green square, folded diagonally, attached to the bottom.

My plan for this sample flower, and the other seven that I'm going to make, is to turn them into holiday napkin rings. The two points of the green square will be joined to make the napkin ring. The cool thing is that people at the dinner can take the flowers home with them, which is really fun.

There is no end to the fun things that can be done with the flower. We've all got a hat or a purse somewhere that could use a little Christmas cheer.

Pin Loom Christmas

Christmas and other, equally challenging gift giving holidays, are going to be here before we know it. I've been thinking about a number of small, thoughtful gifts I could make but its already clear that I am going to run out of time before the samples are all woven and finished. So instead of putting it off for another year, I am going to list the ideas in the next several posts, using older, finished samples or drawings so that I can share the ideas with you.

Idea #1 Make a woven gift bag that could end up being just as treasured as the gift itself. 

Make a bag in sparkly reds and greens or make it in the recipient's favorite colors. The simplest bag is two 4" x 4" squares, joined together. This sample was made with two squares, each with a single crochet edge in the same color as the square with a contrasting color used to whip stitch them together. The top has a double crochet edge with yarn threaded through for a tie. Here is the pattern for the little heart sewn into the bag. You could just as easily add a little Christmas tree or, as you will see in the next post, a snowflake.

Idea #2 Make a Pin Loom Christmas tree for the holidays. 

Foam cones are available everywhere, they make a fun and easy decorative touch for the holidays. Wrap a foam cone in 4" squares, using colored pins as embellishments. You could add on chains, charms and all sorts of extra decorations. Wrap some smaller cones in yarn to make an entire fiber forest!

Don't forget to check on past posts for ideas on Advent calendars, wash clothes and other heartfelt woven gifts.

Pin Loom Advent Calendar, part I

I didn't fill in all the numbers
but you get the idea.

Christmas brings forth my best intentions and designs, such as plans for a Pin Loom Advent Calendar that has been in the works for a number of years. I am getting closer. The green 4" x 4"squares for the banner and the 2" x 2" multicolored squares for little pockets for treats are all woven and waiting to be assembled. My original plan called for a simple grid, which is a perfectly acceptable way to put together the calendar, but seemed boooring.

Here is the newer plan, still in the formative stage. Proof that I'm basically a "nothing succeeds like excess" kind of gal.

This Advent Calendar calls for 25 green squares as well as 24 background squares in a variety of neutral colors. It measures approximately 20" wide by 30" high. In the real hanging the green squares will be a little more random. My plan for the numbers is to use short lengths of brightly colored nylon cord, attaching them with hot glue and then binding them in place with micro-filament thread.  The skinny yellow stars will be yarn embellishments. I am not sure how I am going to make the top star on the tree, I might change it out for a pin loom angel. 

Although it will be too late to use the Advent Calendar this year, I will continue to work on it. I hope to share pics of the actual weaving in  Pin Loom Advent Calendar, Part II.

From the little bit of experimenting that I have done so far on the real squares, it looks like I will need to make a number of changes to this plan including adding more ornaments to the tree and throughout the hanging. One idea that I hope to initiate with this project is making small ornaments out of felted weavies. After all, what better medium for felting than small woven squares? 

Wish me luck. Meg